Products

Steel Shot For Shot Peening

Name: Steel Shot For Shot Peening
Composition: C, Si, Mn, S, P
Size: Can be customized according to customer requirements
Payment:
30% T/T in advance for more than USD2000, balance pay before shipment.
100% T/T payment for amount less than USD2000.

Send Inquiry

Description

Steel shot for shot peening is made by the technology of drawing, cutting, and strengthening. The chemical composition of it determines the high quality of material and higher mechanical properties. We adopt the German advanced cutting technology, and products in strict accordance with the standards of German VDFI8001 SAEJ441/2009 and the United States AMS2431. This ensures a high degree of uniformity in size, hardness and density of all the shots produced, while reducing other impurities in the material, resulting in fewer physical defects in the peening steel shot, more impact resistant fibrous microstructures, and improving shot blasting efficiency.

steel shot for shot peening-4

Product Specification:

Items		Technique Data
Chemical Component	C	0.45%-0.85%
	Si	0.15%-0.35%
	Mn	0.30%-1.30%
	S	<0.050%
	P	<0.040%
	Alloy elements	Appropriate amounts
Hardness		HRC40-50, 50-55, 55-60, 58-63
Density		≥7.6g/cm³
Unit Weight		4.4kg/L
Microstructure		Deformation pearlite

Product Features:

1, The longer service life

Peening steel shot toughness is stronger and not easy to break, so the life is longer and the impact resistance is stronger. Then can achieve the strength of shot blasting in a shorter life. Has lower consumption during use, the service life is 3-4 times of the same specification.

2, The good strengthening effect

In the choice of better shot blasting strengthening equipment, reasonable shot peening process and the selection of our peening steel shot can obtain low surface roughness on the workpieces surface to increase the fatigue life by 30%.

3, The higher cleaning efficiency

Our steel shot for peening can bring higher cleaning quality and cleaning efficiency of shot blasting. Taking normal spring cleaning and gear cleaning as examples, the efficiency of cleaning can be increased by more than 50%.

4, The lower dust emission

The higher service life of the steel shot will greatly reduce the dust it produces. Compared with the ordinary steel shot, the dust emission amount will be at least 30% less than that of the ordinary high steel shot, which reduces the load of dust removal system. It is a real green steel shot.

Product Application:

Steel shot for shot peening widely used in the shot blasting and treatment of workpieces, mainly applied to Aerospace, national defense, military industry, nuclear industry, wind power industry, automobile, motorcycle, shipbuilding, transmission device, spring industry and other fields.

Product Packing: