The polishing wheel is an important polishing material for workpiece polishing applications. Its application with polishing wax can maximize the polishing effect. However, in the polishing process, polishing problems often occur due to the selection of polishing materials and improper polishing operations. The following is a description of the precautions and correct use of the polishing wheel.
First of all, the steering problem of the polishing wheel, the polishing wheel is turned to the operator to run. During the operation, it is necessary to use polishing wax against the edge of the polishing wheel so that the polishing wax adheres to the wheel, and then put the workpiece lightly on the wheel surface, and ensure that the workpiece is below the horizontal plane of the central axis of the polishing wheel, and ensure that the stress on the workpiece is towards itself, so as to avoid The anti-polishing wheel throws the workpiece out of the hand; at the same time, the selection of polishing materials is also very important, and the polishing of different workpieces needs to correspond to different polishing materials.
Then the correct way to operate the polishing wheel is to first touch the wheel surface lightly with the workpiece and then remove the workpiece. This helps to remove sharp corners on the workpiece surface and avoid spotting on the workpiece surface due to excessive use of polishing wax and other polishing materials. If the polishing wax is used too much due to operational errors, it can be wiped off with tools such as iron brushes, and repainted if necessary. At the same time, it should be noted that when the polishing wheel is running, do not force the wax on the surface of the wheel, so as not to affect the rotation speed of the polishing wheel and thus affect the polishing effect.
