For cutting workers in the workshop, working in the hot summer environment is very difficult. Cutting discs can easily become hot after long periods of continuous cutting. Here are a few summer construction precautions to help you.
Precautions for cutting disc construction in summer
1. Perform daily maintenance on the angle grinder
Before use, check whether the angle grinder has a protective cover, whether the cover is secure, and whether the cutting disc is securely installed. Cutting discs are consumables, so be sure to replace them. Do not use damaged cutting discs!
2. Pay attention to electrical safety
Regularly check whether the power cord is securely connected, whether the plug is loose, and whether the switch is flexible and reliable. When there is a power outage, when taking a break, or when leaving the workplace, the power should be turned off immediately.
3. Maintain good heat dissipation from the angle grinder
For angle grinders that are used for extended periods, clean the machine body of any oil or dust promptly to ensure the machine is lightly loaded and maintains good heat dissipation. Pause after half an hour of continuous operation to allow the machine to cool down before use. After extended use, the machine should be run at no-load speed for a short period to allow the motor to cool.
4. Pay attention to the choice of cutting site
Choose an open area to prevent sparks from flying and splashing onto others. Keep away from flammable and explosive items to avoid unnecessary injuries. If it is humid during the rainy season, be sure to stand on an insulator or dry wooden board when working.
Remind everyone that safety is paramount during summer construction! During construction in hot weather, you must pay attention to operational safety and be prepared for heatstroke. If necessary, you can stop the machine for a rest!
