Flap wheels are used for grinding delicate parts and polishing surfaces. Using a wool polishing wheel coated with abrasive paste can remove any traces of previous polishing. Flap discs can replace resin needle-type grinding wheels, offering high elasticity, excellent self-sharpening properties, a high stock removal rate, and low noise levels. They are suitable for grinding welds within housings and burrs on stamped parts, and for grinding and polishing various stainless steel and carbon steel components. Their unique design allows for complete separation of the substrate from the abrasive disc, facilitating manual finishing and ensuring high efficiency and environmental friendliness. Flap wheels can be used on a variety of automatic and manual grinding machines for grinding and polishing, delivering sharp, cutting edges and the ultimate safety for surface treatment.
The first step is to divide the flap wheel into strips. The width and straightness of the strips directly affect the quality of subsequent production. If the width of the abrasive cloth is the same, the subsequent slitting will be smooth, the abrasive cloth wire will be uniform, and the wear on the inlet and outlet of the machine will be relatively small. On the contrary, the wear on the inlet and outlet components will be great, and the width will be inconsistent, which will easily cause the circular knife to deviate. The width of the abrasive cloth wire is inconsistent. In addition, the consumption of the straight knife is also very large, and there will be a phenomenon of cutting tilt. The flap wheel made by tilted abrasive cloth wire will definitely be tilted, which will directly affect the use effect and life of the flap wheel.
