Products

Silicon Carbide For Refractory

Name: Silicon Carbide For Refractory
Composition: Different Binders as the Main Raw Material of Silicon Carbide Sand
Size: Can be customized according to customer requirements
Payment:
30% T/T in advance for more than USD2000, balance pay before shipment.
100% T/T payment for amount less than USD2000.

Send Inquiry

Description

The silicon carbide is a refractory material produced by using different binders as the main raw material of silicon carbide sand. Its thermal conductivity is high, about 10 to 14 times that of clay products; low expansion coefficient, good thermal stability, high temperature withstand voltage, high flexural strength, stable chemical properties, and continuous improvement of adhesives in recent years, overcoming It is easy to oxidize and suffer from alkali corrosion. Therefore, silicon carbide products are not only the necessary refractory materials for vertical tank zinc smelting, but also widely used in industrial furnaces such as iron and steel metallurgy, chemical industry, ceramics, and anti-corrosion wear-resistant pumps and pipeline linings.

black silicon carbide-4

Products Specification:

Silicon Carbide Content	88%-90%, 80%-85%, 70%-75%, etc.
Main Particle Size	10mm-0, 5mm-0, 3mm-0, 1mm-0, 200F, 325F, 500F...

Products Application:

The special properties of silicon carbide refractories determine that it can be used in different conditions and in different industrial fields. Due to its high thermal conductivity, silicon carbide refractories are widely used in the manufacture of muffle furnaces, heated hearths and heat exchangers, crucibles, carburizing tanks, thermowells, closed-end temperature measuring tubes and large bricks.

Silicon carbide products are also used in many non-direct heating furnace structures, such as zinc distillation columns, vertical and horizontal distillation tanks. The SiC refractory has a high mechanical strength and wear resistance over a wide temperature range, so it can be used to make mechanically wear-resistant parts, including low-temperature guide rails and tie rods, as well as strongly worn spins. The lining of the divider, the dust collector, the pipe, the chute, the bottom of the furnace, the lattice plate of the tunnel kiln car, the porous product for the filter gas, and the like.

The special chemical properties of silicon carbide refractories make it very effective in various furnaces and plants in the non-ferrous metallurgical and chemical industries. Silicon carbide refractories are also used in steam boilers.