1. Correct choice. Only by choosing the right product according to the grinding object can the best grinding effect be ensured and the value of the flap disc can be maximized. A high-quality flap wheel has a strong cutting force, can adapt to the cutting of materials of different strengths, has the characteristics of heat resistance and wear resistance, and can better complete large-scale equipment grinding and polishing.
2. Sufficient pressure. During the grinding process, do not apply too much pressure to the flap disc. Excessive use will cause the flap disc to be overloaded. Excessive heat will cause the flap disc to wear faster and reduce the effectiveness of the abrasive. However, if the pressure applied to the flap disc is insufficient, it cannot be bonded with the metal, and the effective grinding effect cannot be achieved, and the grinding time is also extended.
3. Correct use. During use, it needs to form a certain angle with the grinding object, generally between 5-10 degrees on the plane or horizontal. If it is less than this angle, the blade particles will immediately contact the metal, causing the flap disc to wear too quickly. If it is greater than this angle, the blade cannot be fully used. This causes some blades to be excessively worn and ultimately insufficiently polished.
