You who are often exposed to polishing,
You must be familiar with various grinding tools and abrasives.
In ceramic abrasive belts, ceramic soft cloth abrasive belts,
Stacked abrasive sanding belts and other items,
Among various industrial abrasive belts,
Do you ever have a hard time making a choice?
Let's get back to it: What is a stacked abrasive belt?
The stacked abrasive belt is a new type of grinding tool. It has the advantages of high grinding efficiency, stable grinding performance, good grinding accuracy and long service life. It can meet the requirements of various stainless steels, titanium alloys, and various other metals. Grinding, surface drawing and polishing, it is a new type of flexible, preferred abrasive tool for precision grinding.
Belt grinding is elastic contact grinding
Abrasive belt grinding is the squeezing effect of abrasive particles on the surface of the workpiece, causing plastic deformation, changes in the cold hard layer and surface tearing, as well as thermoplastic flow caused by the increase in temperature of the contact point due to friction. Therefore, from this point of view, abrasive belt grinding has the multiple functions of grinding, grinding and polishing at the same time, which is why the surface quality of abrasive belt grinding is good.
On the other hand, due to the elastic grinding characteristics, the length of the abrasive belt in contact with the workpiece in the grinding area is larger than that of the grinding wheel. At the same time, the number of abrasive grains involved in grinding is large, and the load on a single abrasive grain is small and uniform, the abrasive grains are damaged little, and the wear ratio of the entire abrasive belt is small.
A new concept of self-sharpening
Stacked abrasive abrasive belts are a high-strength abrasive belt, made of many micro-powders with precise sizes, which are bonded together to form a large abrasive particle suitable for the needs. The abrasives are evenly "planted" on a specially treated substrate through sand planting technology.
Therefore, like a bonded abrasive tool, the blunt abrasives continuously fall off under the action of centrifugal force during the grinding process, thereby exposing new sand grains, so that grinding and polishing can be performed stably.
