+86-533-2805169

Why A Vitrified Grinding Wheel Can Outperform A Harder Wheel: The Importance Of Porosity

Nov 17, 2026

Many buyers focus on whether a wheel contains diamond or CBN but overlook the bond type. When grinding hardened steel, the wrong choice can cause workpiece discoloration, grinding burn, and costly rework. In many cases, choosing the right vitrified grinding wheel can solve the problem more effectively than simply switching to a harder wheel.

 

1. Understanding the Three Basic Elements of a Grinding Wheel

 

A superabrasive grinding wheel consists of three elements: abrasive grains, bond, and pores. The bond holds diamond or CBN grains in place and provides structural strength, while pores allow coolant to enter the grinding zone and provide space for chips. Even with the same abrasive, different bonds can produce very different grinding results.

 

Diamond abrasives are available in several grades, including RVD, MBD, SCD, SMD, DMD, and M-SD. Lower-grade RVD is commonly used in resin- and vitrified-bonded tools, while metal- and electroplated-bonded wheels generally require higher-grade diamond. CBN is available in Type I and Type II. Type II offers greater crystal integrity, strength, and thermal stability, but comes at a higher cost.

 

Abrasive concentration is another important factor. A wheel with a concentration of 75 contains only 18.75% superabrasive by volume in its working layer. This is considerably less than the approximately 34% abrasive content found in a conventional open-structure vitrified wheel. To maintain the required structure, lower-concentration superabrasive wheels often contain supplementary abrasives such as white aluminum oxide or silicon carbide. Therefore, a concentration rating of 75 does not mean the wheel is 75% diamond.

 

2. Four Common Bond Types and Their Characteristics

 

Resin-bonded wheels are made through hot pressing and curing. They generally have a dense structure, moderate bond strength, limited heat resistance, and can be difficult to dress.

 

A vitrified grinding wheel is fired at high temperatures and has an open, porous structure. It offers good bond strength, shape retention, and relatively easy dressing. Metal-bonded wheels are usually made through powder metallurgy. They provide high bond strength but have a dense structure and are difficult to dress.

 

 

Electroplated wheels feature a single abrasive layer deposited at room temperature. They usually require no dressing, but their bond strength is relatively limited, with only 20%–30% of each grain exposed. Brazed wheels also have a single-layer structure, but high-temperature brazing creates a stronger bond and exposes around 70%–80% of each abrasive grain.

 

The main advantage of a vitrified grinding wheel, especially a vitrified CBN wheel, is its combination of heat resistance, chemical stability, and shape retention. Its open pores help carry coolant and clear chips, reducing loading and the risk of grinding burn. It also offers good self-sharpening performance and generally requires less frequent dressing than metal-bonded wheels.

 

Brazed wheels are particularly suitable for heavy-duty applications because their high grain exposure provides ample chip clearance while maintaining strong abrasive retention. Some designs can operate at peripheral speeds of 300–500 m/s. Meanwhile, vitrified CBN wheels are widely used in precision grinding applications such as toolmaking, bearing production, and automotive component machining.

 

3. Three Practical Steps for Better Wheel Selection

 

01. Match the abrasive to the workpiece material.

Avoid resin-bonded diamond wheels when grinding hardened steel, cast iron, and other iron-based materials. Diamond can react with iron at high temperatures, accelerating abrasive wear. Choose CBN wheels with a vitrified or metal bond instead to reduce the risk of grinding problems.

 

02. Choose an open structure for heavy-duty grinding.

For heavy stock removal and creep-feed grinding, consider a vitrified grinding wheel or a brazed wheel. The high grain exposure of brazed wheels provides better chip clearance and helps prevent loading. Both options can help control grinding forces and temperature when correctly matched to the application.

 

03. Specify the bond type when purchasing.

Do not simply write "diamond grinding wheel" on a purchase order. State the required bond type and workpiece material. Resin, vitrified, and metal bonds differ significantly in cost, service life, and application suitability. Clear specifications help prevent mismatched purchases and unnecessary expenses.

 

4. The Real Cost of Choosing the Wrong Wheel

 

The performance gap between CBN wheels can be significant. In one comparison, a high-performance wheel achieved a depth of cut of 0.1 mm per pass and a grinding ratio (G-ratio) of 80 under dry conditions. Another achieved only 0.02 mm per pass and a G-ratio of around 20. These differences directly affect machining efficiency and production costs.

 

Choosing the wrong bond does more than increase wheel consumption; it can limit the output of an entire grinding line. In camshaft grinding, using a vitrified grinding wheel has been reported to improve production efficiency by around 10%, potentially outweighing the difference in purchase price.

 

A grinding wheel does not need to be as hard as possible. The key is finding the right balance of bond strength, abrasive retention, and porosity. A porous vitrified grinding wheel can often protect the workpiece better than a dense, rigid wheel while delivering stable grinding performance.

 

Send Inquiry