Cemented carbide tools offer excellent hardness and wear resistance, but their brittleness and sensitivity to heat make them difficult to grind. Common problems include edge chipping, microcracks, cobalt binder softening, and grinding burn. Conventional alumina and silicon carbide wheels often struggle to meet the demands of these applications. With good self-sharpening properties, elastic cushioning, and excellent surface finish, the resinoid diamond grinding wheel has become a popular choice for semi-finishing, finish grinding, edge sharpening, and profile grinding of cemented carbide tools.
These wheels use diamond abrasive grains with a phenolic resin bond. Graphite and pore-forming agents can also be added to improve lubrication and heat dissipation. Compared with metal-bonded and vitrified diamond wheels, the resinoid diamond grinding wheel offers greater elasticity. As abrasive grains become dull, they gradually break away with slight bond wear, exposing fresh cutting edges and helping prevent chip loading and wheel glazing.
The bond also absorbs grinding forces and reduces vibration, lowering the risk of chipping on thin cutting edges and tool tips. When used with suitable grinding fluid, it helps control heat and minimize thermal damage to carbide tools. It can also produce excellent surface finishes, with fine grinding applications achieving Ra values below 0.2 μm.
Key Factors for Resinoid Diamond Grinding Wheel Selection
When selecting a resinoid diamond grinding wheel, consider the following factors:
Grit size:
Use 80#–180# for rough grinding, 240#–320# for semi-finishing, and 400#–800# or finer for finish grinding and edge polishing.
Diamond concentration:
A concentration of 75%–100% is commonly used for general tool sharpening. Medium concentrations are often preferred for profile grinding and finishing to balance cutting performance and service life.
Bond hardness:
Softer bonds provide better self-sharpening and cutting action. Medium-hard bonds are suitable for batch finishing operations. Graphite-filled formulations offer improved lubrication and can be used for light-load dry grinding.
Wheel shape:
Common options include straight, dish, cup, and double-recessed 4A2 wheels. These are compatible with tool grinders, knife sharpening machines, and saw blade grinding machines.
Operating and Maintenance Recommendations
Wet grinding is generally preferred, using a suitable water-soluble grinding fluid. Keep the wheel speed within 30–50 m/s and use light infeed with multiple passes to avoid sudden loading or impact.
For dressing, apply light pressure and use a silicon carbide dressing stick or dressing tool to restore the wheel profile. Store the resinoid diamond grinding wheel at room temperature, away from direct sunlight, heat sources, and solvents. Before installation, inspect it for cracks and ensure proper static balancing.
Application Benefits
The quality of a cemented carbide tool's cutting edge directly affects its cutting performance and service life. The resinoid diamond grinding wheel combines sharp cutting action, low grinding damage, and excellent surface finish, making it widely used for sharpening indexable inserts, solid carbide end mills, drills, and carbide saw blades.
New developments in modified resin bonds, porous formulations, and coated diamond abrasives continue to address issues such as chip loading and heat resistance. Choosing the right wheel and following proper operating procedures help tool manufacturers maintain consistent quality, reduce scrap, and control grinding costs.



