What is the difference between grinding discs, grinding wheel discs and cutting discs? The appearance of these products is quite similar, and they are all disc-shaped, so many people can't tell them apart. The following is an introduction to their differences.
 |  |  |
First of all, the Grinding discs uses high-voltage electrostatic field force to plant fine abrasive particles (alumina or silicon carbide) on the high-strength polyester film, so that all the sharp blades of the sand particles face outward, and the cutting is sharp, which can provide higher grinding cutting efficiency and bright and delicate polishing effect, and then processed by backing and cutting. The abrasive particles of the grinding disc are directionally arranged, and the surface of the product is sharp, which ensures the good grinding performance of the abrasive belt. The abrasive particles on the surface of its products are evenly distributed, combined with special binders, to prevent deep and irregular lines, and good chip removal ability is not easy to cause blockage. In general, the role of this consumable is to grind the workpiece.
Cutting discs refer to thin sheets made of abrasives and binder resins that are used to cut ordinary steel, stainless steel and non-metallic materials. It has the characteristics of bending strength, so it is widely used in the production and blanking of ordinary steel, stainless steel and non-metal. The cutting disc is relatively thinner than the grinding disc. If we don't know about these two consumables, we can distinguish them by their thickness.
Grinding wheel discs, it can also be called grinding discs. After all, its function is also polishing. Disc sand is a circular sanding sheet processed with sandpaper. It can be divided into quilt and double-sided tape. It is used to polish hardware accessories, plastics or auto parts. It is faster than ordinary sandpaper when used. Grinding wheel discs is a very common abrasive tool in the grinding process. It is usually made by adding a binder to the abrasive, and is made by compacting, drying and roasting. Its characteristic parameters mainly include abrasive, viscosity, shape, hardness, bonding, dosage, size, etc.
1. According to the abrasive, the grinding wheel discs can be divided into ordinary abrasive (corundum and silicon carbide, etc.) grinding wheel, natural abrasive superhard abrasive and diamond and cubic (boron nitride, etc.) grinding wheel.
2. According to the shape, the grinding wheel discs can be divided into flat grinding wheel, cup grinding wheel, cylindrical grinding wheel, bevel grinding wheel, dish grinding wheel, etc..
3. According to the shape, the grinding wheel discs can be divided into flat grinding wheel, cup grinding wheel, cylindrical grinding wheel, bevel grinding wheel, dish grinding wheel, etc..
